Envy Drive Ltd | Resin driveways in Doncaster — price yours in two minutes
Call07463 075235
Resin bound driveway laid by Envy Drive in Doncaster

Doncaster & South Yorkshire · 8 years

Find out what your drive costs before anyone knocks on your door.

Draw round your driveway on the satellite photo of your own house and you'll have a real figure in about two minutes. No forms first, no salesman in your front room. If you like the number, Reece comes out one evening and prices it properly.

Draw my drive See our work
Approved resin bound installers 98% recommended · 34 reviews Free evening surveys
  1. 1Measure
  2. 2Specify
  3. 3Your details
  4. 4Price & survey

Where's the drive?

Type the address and we'll pull up the satellite photo of your house.

Loading satellite…
Search the address to load the satellite view
0 corners

Why we get you to draw it yourself

It sounds like a gimmick until you've had three driveway firms out and none of them rang back. Tracing the drive takes you two minutes and it changes how the whole thing goes.

  • You get the number first

    Not after a phone call, a form, and a bloke sat in your kitchen for an hour. If it's miles off what you had in mind, you've lost two minutes rather than an evening.

  • The shape is yours, not a guess

    Every drive is a funny shape. Tracing your actual one beats "roughly how big is it?" down the phone, which is where most quotes go wrong.

  • You can try the options

    Change the finish, change what's underneath, watch the price move. Nobody's stood over you while you do it.

  • The survey is twenty minutes, not two hours

    Reece turns up already knowing the size and what you're after. He's checking levels, drainage and what's under the surface — not measuring from scratch and selling at you.

Drone shot of an Envy Drive driveway part way through the job Shape done · price ready

That's all it is. Tap round the edge of your drive and the price comes back. Try it on your own house.

Measure my drive

How it goes, start to finish

Drone view of a driveway part way through
01

Trace it

Outline the drive on the satellite photo of your own house.

Envy Drive signature tarmac driveway
02

Pick a finish

Resin bound, block paving, imprinted concrete or tarmac.

Resin bound driveway with a block pavior border
03

See the price

A real range, on screen, before you speak to anybody.

Finished resin bound driveway
04

Book the survey

Pick an evening. Reece comes out and fixes the price in writing.

Reece power floating a driveway to a smooth finishReece, power floating to a smooth finish

You'll be dealing with Reece

Not a call centre, not a commission-only salesman who's never held a trowel. Reece quotes every job himself and he's on the tools for the work, with James and the team. That's him on the power float.

Eight years of resin bound drives across Doncaster and South Yorkshire, two fitting teams, and a diary that's usually three months out — which we'd rather tell you now than string you along about.

We don't lay over the top of an existing drive. If the base has gone, it comes out and gets built again properly. It costs more and takes longer, and it's the reason the drives we laid five years ago still look right.

— Reece Organ, Envy Drive Ltd

8years trading
98%would recommend
34five-star reviews

Recent drives

Doncaster and across South Yorkshire
Completed resin bound driveway
Resin bound, finished
Resin bound driveway with block pavior border
Resin with a block border
Reece power floating
Reece on the power float
Drone shot of a drive mid-job
From above, mid-job
Envy Drive signature tarmac driveway
Envy signature tarmac

What's underneath

How we build a resin drive, layer by layer

Any drive looks good on the day it's finished. What's under it decides whether it still looks right in ten years. Ours is around 20cm deep from surface to soil, with no tarmac or concrete slab in it: every layer, top to bottom, lets the water through.

    Why it's SuDS compliant

    Sustainable drainage means rain goes back into the ground where it lands, not down the road and into the drains. In England a new front drive over 5 m² normally has to manage that, or it needs planning permission. Because the surface, the base and the sub-base are all permeable, this build does it on its own. No gullies, no soakaway to dig.

    Price my resin drive
    Envy Drive signature tarmac driveway
    Envy Drive signature tarmac

    Not just resin

    Tarmac, laid the Envy way

    Resin is what we're known for, but plenty of drives round Doncaster want tarmac, and we lay it the same way we lay everything else: the old surface out, a proper base down, and a clean edge that stays crisp.

    Standard tarmac doesn't drain through the surface the way resin does, so on a front garden Reece will talk you through where the water goes before anything's agreed.

    Get price

    What Doncaster says

    98% recommended from 34 Facebook reviews

    ★★★★★

    "They were all very professional and worked extremely hard."
    Gill M.Old drive dug out, new resin laid

    ★★★★★

    "Reece came and took control of a bad situation and made everything perfect."
    Sharron T.Failed drive put right

    ★★★★★

    "Great communication from the start, highly competitive quote, top quality workmanship."
    Rebecca W.Tarmac drive

    ★★★★★

    "Professional, hardworking, and took real pride in their work."
    Anselm G.Resin drive and patio, Reece and James

    ★★★★★

    "Their work rate was unbelievable and we are so pleased."
    David M.New resin drive

    ★★★★★

    "Reece has just finished my patio area and wow, what a top job."
    Darren R.Patio area

    The questions everyone asks

    Is the online price the final price?

    No, and anyone who tells you otherwise off a satellite photo is having you on. It's a guide based on the shape you traced and what you've told us is underneath. Reece checks levels, drainage, access and the sub-base on site, then gives you a fixed written price.

    How accurate is the satellite measurement?

    Close enough to price from, as long as the photo is recent and you trace the edges carefully. Trees, shadows and older imagery can hide the real edge — which is exactly why every job still gets a proper survey.

    Do you lay resin over an existing drive?

    No. We dig out and build a proper base. Laying over something that's already moving is how drives fail two winters later, and we'd rather turn a job down than do it that way.

    Do I need planning permission?

    Front gardens over 5 m² in England generally need a permeable surface, or drainage to a lawn or border, to avoid needing permission. Resin bound on an open base is permeable. Reece will advise on the right build-up for your drive.

    How soon can you start?

    We're usually booked around three months ahead. Better you know that now than find out after you've picked your stone. Surveys are much sooner, and once you've got a fixed price you can take a slot in the diary.

    Am I going to get pestered?

    No. You'll get your price, and a call to sort the survey if you asked for one. That's it.

    Two minutes, and you'll know

    Draw round your drive on the satellite photo and see the number for yourself. No forms first, no obligation.

    Draw my drive
    Call Reece